0731-88696979

5 Steps to Daily Maintenance of Food Vending Machines

Regular vending machine maintenance is the key to maintaining the stable operation of the equipment, and at the same time prolonging the service life of the equipment, and the stability and service life of the equipment are important factors that directly affect the revenue.
Therefore, do a good job in the daily maintenance of the food vending machine, which will increase the operating time in disguise and earn more wealth for you!

Maintenance Parts List & Frequency
Maintenance operation guide for each component Maintenance frequency: replenishment each time
Pickup port cleaning
The pick-up port needs to check the sanitation every time it is replenished:
1. There may be situations such as canned beverages falling and spraying at the pick-up port. Failure to handle them in time will cause stains on other shipped products.
2. In summer, the temperature is changeable and there is a lot of rain. The pick-up port is prone to stains and water accumulation because it is connected to the outside world.
If there is any stain, it needs to be cleaned up with a towel in time, so as not to contaminate the product, bring a bad shopping experience to the user, and also a safety hazard that cannot be ignored.
Daily maintenance of infrared touch box
1. Wipe the touch screen with a dry towel to prevent touch failure due to too much dust.
2. If it affects the normal purchase of consumers, it is necessary to check the USB interface of the touch box to avoid poor contact.
Maintenance frequency: once a month
Operator: Replenisher

Cleaning and maintenance of vending machine body
As the saying goes, people rely on clothes and horses rely on saddles, and the same is true for vending machines. A good and tidy appearance can attract more passenger traffic to a certain extent, so be sure to do a good job of cleaning the fuselage:
1. When there is dust on the vending machine body, wipe it with a dry towel to keep the appearance of the vending machine clean.
2. If the dirt is serious, it can be cleaned with a semi-dry towel or neutral detergent.
3. If the machine has been used for a long time or has scratches and other damage, it is recommended to use stickers to make the vending machine look neat and clean.
[Special reminder] When removing dirt from the fuselage, please use a neutral detergent to clean it. Do not use acidic or alkaline solvents. Otherwise, the parts such as the window panels may be corroded and cracked or the paint on the body may fade. It is forbidden to use chemicals such as paint solvents and banana water, which are prone to accidents!

Check if the spring is working properly
1. Test the cargo lane to see if there is any abnormal rotation of the spring and adjust it.
2. Confirm that the spring angle position is reasonable.
3. Check the motor cable for looseness.
Infrared drop module inspection
The infrared dropout module is an important basis for detecting whether the product is dropped or not. The methods are as follows:
Swing your hands up and down to see if the infrared drop can receive signals normally.
Tray cleaning
Regularly clean the vending machine shelves, open the door of the commodity display room, and wipe off the dust with a dry cloth; if the dust is serious, clean it with a towel and a neutral detergent.
Maintenance frequency: once every two months
Operator: maintenance worker

Check each wiring interface
Check the line interface of each module of the device as follows:
1. Plug and unplug the interface, making sure all wiring connections are tight.
2. Use WD-40 cleaner to clean the circuit of the computer motherboard for the interface found to be oxidized.
Maintenance frequency: once a year
Operator: maintenance worker
Condenser cleaning
Clean the condenser once a year (check and clean it once before turning on the compressor in summer), use a vacuum cleaner and an anti-static cleaning brush to remove the garbage or dirt attached to the radiator of the condenser. If it is not cleaned for a long time, it will lead to poor cooling effect, power consumption, and serious compressor failure.
[Note] Use an anti-static brush made of materials other than metal, move it up and down for cleaning, or use a vacuum cleaner to suck it out, otherwise it will affect the cooling of the machine. If the dirt is serious, you need to disassemble the cooling unit for deep cleaning.
If the vending machine is not used for a long time, you can do the following operations to reduce the loss.
1. When not using the vending machine for a long time, please lock the machine.
2. Take out all the goods in the equipment, and clean the cargo channel to avoid rust.
3. The switch of the leakage protector is set to OFF, please be sure to turn off the power.
4. Wipe the outside of the machine clean and keep it dry.
5. Drain the water in the evaporator water tank, rinse and dry.
6. Ensure that the device is placed in a rain-proof, moisture-proof and sun-proof environment, and cover it with a protective cover for proper storage.

Leave a comment

Your email address will not be published.